Wide view of a white kitchen with a long island, white cabinet doors, and light plank flooring
White cabinets · refinished
Room reflections and a stainless pull on finished black island doors in Temecula
Black island · sprayed 2K

Sprayed 2K

Cabinet Refinishing Cost in Lake Elsinore

A smooth sprayed finish. A kitchen you're proud to show off.

  • Yelp: 56 reviews, 4.8-star rating
  • Google: 10 reviews, 5.0-star rating
  • 5-Year Written Warranty

    The written 5-year warranty covers chipping, peeling or blistering caused by faulty preparation. The coating itself is covered by its manufacturer.

  • CSLB #1015608

See and feel finish samples in your own kitchen.

Standard single-color exterior cabinet refinishing commonly runs about $135–$185 per cabinet door and $95–$145 per drawer front before project-specific adjustments.

Temecula Valley · Cabinet cost guide

Budgeting for Lake Elsinore cabinets

Southern California planning guidance — not a price list.

Canyon Hills and Tuscany Hills are separate planned areas. The cabinet quote follows the kitchen’s count and condition, with access and optional work identified in advance.

Count the pieces. Define the work.

What the Lake Elsinore planning ranges cover

Each rate is per one physical cabinet door or drawer front — not per cabinet box.

Cabinet refinishing planning ranges: doors and drawer fronts, grain filling, and painted interiors
OptionWhat it coversPlanning range
Cabinet doorFront and back painted; cabinet boxes, face frames, toe kicks, and side panels included$135–$185 per cabinet door
Drawer frontPainted; same inclusions as the door$95–$145 per drawer front
Grain filling (optional)Light for shallow grain or heavy for deep grain such as red oak; door fronts only, or fronts and backsadds $30–$85 per cabinet door; $10–$20 per drawer front
Painted interiors (optional)The inside of the cabinet boxes, cleaned and sprayed; an average, since it depends on how many boxes there are and their conditionadds $35–$60 per cabinet door; $25–$45 per drawer front

These planning ranges include the standard exterior work on your cabinets: door fronts and backs, drawer fronts, face frames, box exteriors, toe kicks, and side panels.

They also include removal and reinstall, preparation, 2K polyurethane, HEPA-vacuumed sanding, sealed negative-pressure containment, and the 5-year written warranty.

Tyler Fowler handles each project personally.

Oak grain remains visible unless you choose grain filling.

A fan draws air through a regular filter and vents outdoors to help control airborne dust, overspray, and fumes within the work area.

Tyler provides a fixed written quote after counting your doors and drawer fronts and looking over the cabinets in person.

For a full kitchen, the door and drawer-front count is the starting point.

Pricing guidance last verified October 24, 2026.

Canyon Hills and Tuscany Hills: count the actual kitchen

Lake Elsinore’s Hills District plan identifies Canyon Hills and Tuscany Hills as separate planned residential areas. The city also includes older housing alongside substantial 2000s construction, as described in its SCAG housing profile. A planned-community address does not identify the present kitchen material or its remodeling history.

For a Canyon Hills estimate, list pantry storage and island fronts along with the main wall runs. Ask which built-ins are part of the requested project. The room’s overall size is a poor substitute for a count when one layout has many drawers and another uses broad doors.

For a Tuscany Hills kitchen, point out later repainting or replacement fronts if the history is known. Oak, smooth-faced wood and painted surfaces are inspection possibilities, not a species map of the neighborhood. Tyler needs to see the finish and substrate before deciding how much correction belongs in the quote.

A Hills District address needs its own access plan

The Hills District plan places these communities in a landscape of slopes and varied development areas. Describe the route from parking to the kitchen and any stairs or constrained carrying space. A hillside address can raise practical questions, but it does not establish that the cabinetry itself needs more preparation.

Bring any association instructions relevant to the requested work and entry. A color or contractor rule for one property should not be applied to every Lake Elsinore home. The fixed quote should describe the agreed kitchen scope, while access requirements are confirmed from the address rather than neighborhood assumptions.

Lake Elsinore’s inland setting has dry summers and a wetter winter season. A nearby lake does not prove that indoor cabinets have a humidity problem. Show actual staining, swelling or finish failure at the sink and other affected areas; those observations are useful evidence for the condition review.

Separate texture choices from necessary repair

If the cabinets are open-grain wood, decide whether visible texture should remain under the new color. Grain filling is an optional finish choice. Water-damaged material or peeling old coatings are condition issues instead; they should be identified separately rather than hidden inside a general grain-filling allowance.

Painted interiors are another separate decision. Inspect whether the existing factory surfaces are sound and which areas will be visible in daily use. The planning table gives a common regional structure, while a Canyon Hills or Tuscany Hills visit determines which options and repairs belong in the final written quote.

Planning the visit from Anza

Lake Elsinore is about 51 road miles from Anza in city-to-city routing. One western approach uses CA-371 and CA-79 toward Temecula, then I-15 north. Canyon Hills and Tuscany Hills require their own local approach, so the property address and access instructions are part of arranging the estimate.

Local context sources

Housing history and place names are context for an inspection; they do not establish the material in an individual kitchen.

Questions before the quote

Lake Elsinore cabinet cost FAQ

Does Canyon Hills have a standard cabinet count?

No. The city identifies Canyon Hills as a planned area, but individual layouts and remodels vary. Count the kitchen, pantry and island pieces that should be refinished. A community name or a floor-area estimate cannot establish how many doors and drawer fronts are in the requested scope.

Should a Tuscany Hills repaint be priced like an untouched factory finish?

Not without inspecting it. If a previous repaint is present, show Tyler where it is lifting or worn and share its history if known. A Tuscany Hills address does not establish coating compatibility or mean every cabinet surface has the same preparation need.

Does living near Lake Elsinore prove the cabinets have moisture damage?

No. Proximity to the lake is not evidence of a problem inside the kitchen. Show actual swelling, stains or peeling near sinks and other affected areas. The condition of those surfaces, rather than a city-wide humidity assumption, belongs in the repair assessment.

What access details matter for a Hills District kitchen?

Explain the parking-to-kitchen route, stairs and any contractor-entry instructions for the property. Canyon Hills and Tuscany Hills have their own local approaches. Planning the carrying route helps define the work without creating an automatic hillside surcharge or a different published rate.

Is grain filling the same as repairing damaged Lake Elsinore cabinets?

No. Grain filling changes the appearance of open-grain wood, while damaged substrate or failed old coatings need their own assessment. During a Lake Elsinore estimate, identify both the desired texture and the surfaces needing repair so the written options do not confuse those two decisions.

Plan the Lake Elsinore cabinet project

Get Your Free Estimate

Or call (951) 551-0583

Tyler or Melissa will reply to set up a visit. Tyler brings a sample to your home and gives a fixed written quote after looking over the cabinets in person.

The Finished Result

A smooth, sprayed 2K finish on a kitchen island, refinished in place.

Watch the reflection · 0:04
Black island door and drawer bank with brass knobs; the room reflects in the sprayed door
Black island · sprayed 2K

What goes into that finish

The work behind the finish.

The time is in the preparation, surface corrections, sanding and sprayed coating system. These are photos from Tyler’s process.

The Cabinet Refinishing Process

Four production phases, from door removal through the final walkthrough. Tyler Fowler handles each project personally.

  1. Kitchen openings, counters and floors masked before cabinet preparation

    Protect & clean

    Remove and label the doors. Mask the kitchen, degrease and prepare the surfaces.

    Cabinet box exteriors are sprayed in place, inside a sealed, negative-pressure work area that is set up in the kitchen before sanding begins and stays in place through spraying.

    A fan draws air through a regular filter and vents outdoors to help control airborne dust, overspray, and fumes within the work area.

    Protect and prepare

    The doors and drawer fronts are prepped at Tyler's shop. The cabinet boxes get the same prep in your kitchen, where you can see it done.

  2. Applying glazing putty to a primed cabinet door on a lit inspection table

    Prime & correct

    The longest step. Two primer coats. Between them, every surface is skim-coated with glazing putty, dents and seams are spot-puttied, and it is all sanded smooth. Every surface is checked under bright inspection lights before the topcoat. Optional grain filling.

  3. Sanding the glazing-putty skim on a cabinet door

    Sand smooth

    Sand the corrections, primer and between topcoats. Each coat needs drying time.

    Sanding is HEPA-vacuumed, and the cabinet exteriors are finished in 2K polyurethane.

  4. Tyler spraying 2K polyurethane on a prepared kitchen end panel

    Spray & reinstall

    Spray two to three 2K topcoats. Reinstall and align the doors once ready.

    Doors and drawer fronts are sprayed in the negative-pressure booth at the shop.

    Cabinet boxes are sprayed in place inside the sealed work area.

    Build the finish

    The topcoats go on the same way as the primer: doors in the shop's spray booth, boxes in your kitchen's sealed, negative-pressure work area. Each coat gets the required drying time before the next step.

    Back together

    Required drying time, reinstallation, alignment, and the final walkthrough.

2K polyurethane costs more than one-part cabinet paint. Your quote also covers the preparation, shop finishing and drying time shown here.

In your kitchenAbout a weekSealed only during the in-home week.
Doors & drawer fronts in the shopAbout a weekUse your kitchen without the doors.

Larger kitchens and grain filling take longer; your written quote gives the dates.

More process close-ups

See the full spray photo

See the full 14-step process

Finish proof

The finish, up close

White kitchen cabinets and a white island with silver appliances and a vase of branches
White kitchen · refinished

Cabinet refinishing in Lake Elsinore

Keep your kitchen.
Change the finish.

Sound cabinets and a layout you like? Refinish the cabinets you already own in sprayed 2K polyurethane.

  • A sprayed cabinet finishTwo-component 2K polyurethane, with preparation and sanding between coats.
  • Tyler handles your projectFrom the in-home estimate through reinstall and the final walkthrough.
  • A written prep warrantyFive years for chipping, peeling or blistering caused by faulty preparation.
Tyler Fowler, owner of Parallel Painting
Owner-Operated

Meet Tyler

Tyler Fowler handles each project personally, from the estimate through the final walkthrough. Melissa handles scheduling and the phone; you can always ask for Tyler.

  • One jobat a time, Tyler on site
  • 5 yearswritten warranty on prep
  • Samplesin your own kitchen
  • 2016CSLB #1015608 since
Yelp: 56 reviews, 4.8-star rating · Google: 10 reviews, 5.0-star rating

Why Homeowners Choose Parallel Painting

Sprayed 2K polyurethane, a sealed negative-pressure work area, careful preparation and a written 5-year warranty.

  • 2K Polyurethane

    A factory-grade, two-component catalyzed polyurethane, sprayed with HVLP in two to three topcoats.

  • HEPA-Vacuumed Sanding

    Industrial HEPA vacuums hooked to sanders during prep.

  • Sealed Negative-Pressure Containment

    Before sanding starts, Tyler seals the work area and establishes negative pressure.

  • Owner-Operated

    Tyler Fowler handles each project personally, from the estimate through the final walkthrough.

The Coating System

Sprayed 2K Polyurethane, Built Over Real Prep

Every door and drawer front comes off, gets cleaned and sanded, and is sprayed in the negative-pressure booth at Tyler's shop. The cabinet boxes get the same 2K polyurethane right in your kitchen, sprayed inside a sealed, negative-pressure work area that Tyler sets up before sanding begins and keeps in place through spraying. Sanding is HEPA-vacuumed. Priming and surface correction is the longest step of the job. After the first primer coat, every door, drawer front and cabinet surface is skim-glazed with glazing putty, dents, gouges and open seams are spot-puttied, and everything is sanded back smooth. Doors and drawer fronts are checked on inspection tables under bright shop lights, and the cabinet boxes are checked in the kitchen with LED inspection light bars, so dents, sanding marks and uneven spots are found and fixed in primer, before the 2K topcoat goes on. The second primer coat goes on over that corrected surface, so the 2K topcoat lays down on a flat, uniform base. Open-grain oak can also be grain-filled for a glass-smooth door. 2K is a two-component catalyzed finish: it chemically cures into a hard, tough shell instead of just drying like paint.

  • Factory-grade two-component (2K) polyurethane, sprayed
  • Doors and drawer fronts sprayed in a negative-pressure booth at the shop
  • Cabinet boxes sprayed in place inside a sealed, negative-pressure work area
  • HEPA-vacuumed sanding, multiple finish coats on every kitchen. Prime & correct. The longest step. Two primer coats. Between them, every surface is skim-coated with glazing putty, dents and seams are spot-puttied, and it is all sanded smooth. Every surface is checked under bright inspection lights before the topcoat. Optional grain filling.
Wide view of a white kitchen with a long island, white cabinet doors, and light plank flooring

Reviews

Client Reviews

Read reviews on Google and Yelp

“Tyler's work was meticulous. The cabinets look new. The wear, tear, and damage is gone. I could never have done this quality of work myself.”

MichaelGoogle review

“Tyler’s workmanship is exceptional! He’s meticulous when it comes to his work. He refinished our kitchen cabinets and they look amazing! I highly recommend Parallel Painting!”

Carmen A.Google review

“He turned our beech colored wood shaker cabinets into white cabinets and painted our island blue for a nice pop of color. You can tell Tyler takes pride in his work and is very meticulous to every single detail.”

Jamie T.Yelp review

“He also painted my kitchen cabinets and my bedroom doors and trim as well as the front door. So basically everything in my tiny 600 ft condo. It came out gorgeous. He's on time and a meticulous worker.”

SusanGoogle review

Next step

Ready for a Factory-Grade Finish on Your Cabinets?

Tyler takes one job at a time, and Melissa handles his schedule and the phone. Call or text for an in-home estimate.

Call or text Tyler: (951) 551-0583

Call (951) 551-0583Get Your Free Estimate