Cabinet Refinishing in Rancho Mirage

Standard single-color exterior cabinet refinishing commonly runs about $165–$215 per cabinet door and $120–$155 per drawer front before project-specific adjustments. This is Southern California planning guidance — not a price list. Each rate is per one physical cabinet door or drawer front — not per cabinet box. These planning ranges include the standard exterior work on your cabinets: door fronts and backs, drawer fronts, face frames, box exteriors, toe kicks, and side panels. They also include removal and reinstall, preparation, 2K polyurethane, HEPA-vacuumed sanding, sealed negative-pressure containment, and the 5-year written warranty. Tyler Fowler handles each project personally. Oak grain remains visible unless you choose grain filling. Three things set the price: Doors and drawer fronts: the per-piece range above, with the cabinet boxes, face frames, toe kicks, and side panels included. Grain filling: adds about $30–$85 per cabinet door and $10–$20 per drawer front, depending on how deep the grain is and whether the backs of the doors are filled too. Painted interiors: add about $35–$60 per cabinet door and $25–$45 per drawer front on average, depending on how many cabinets there are and the condition of the insides. Some interiors are prefinished and fine as they are. A small kitchen costs more per door, because the same sealed, negative-pressure work area still has to be built around it. Extreme conditions, like a failing old finish or heavy damage, cost more too. Additional colors, repairs, and specialty finishes can also add to the price. Tyler provides a fixed written quote after counting your doors and drawer fronts and looking over the cabinets in person. For a full kitchen, the door and drawer-front count is only the starting point. Most full-kitchen 2K refinishing projects are several-thousand-dollar projects; larger custom kitchens can reach five figures.

Most kitchens take two to three weeks, start to finish. Only about a week of that is work in your home; the doors and drawer fronts are finished in the shop. Tyler begins with a walkthrough, then removes every door, drawer front, and piece of hardware and labels each for exact reinstallation. He encloses the kitchen in a sealed, negative-pressure work area with plastic walls, sealed edges, and an exhaust fan with a regular filter, vented outside. Doors and drawer fronts are prepared and sprayed in the negative-pressure booth at his shop, while the cabinet frames are sprayed on-site inside the sealed work area. Tyler then reinstalls and aligns every piece and walks through the finished work with you. If the community requires it, Tyler coordinates access with the property manager in advance and provides photo and video updates throughout the project. A fan draws air through a regular filter and vents outdoors to help control airborne dust, overspray, and fumes within the work area.

Yes. Kitchens with 50 to 70 doors and drawers and full islands are within Tyler's experience. He handles these projects from the first walkthrough through final hardware alignment, giving the same attention to detail on door number 60 as on door number 1. For projects of this scale, Tyler provides a detailed phasing plan and staggers preparation, spraying, and drying across cabinet zones to reduce how long any one area is out of service. Larger kitchens and higher door counts take longer than compact kitchens, so the schedule depends on size and scope. Every project includes the same 5-year written warranty covering every door, drawer, and frame.

Yes. Parallel Painting serves Rancho Mirage from Tyler’s Anza base. Cabinet projects may include alder, cherry, walnut, and quarter-sawn oak, often with complex door profiles. Tyler assesses each kitchen in person before quoting and applies the coating with HVLP spray equipment. Each project includes a written 5-year warranty.

Standard cabinet painting uses single-component latex or alkyd paint that air-dries. The refinishing process uses 2K polyurethane — a factory-grade, two-component catalyzed system where the resin and a hardener cross-link as they cure into a hard, smooth cabinet-grade finish. Tyler sprays 2K polyurethane with professional HVLP equipment in two primer coats and two to three topcoats. After thorough surface preparation, sanding uses 220 after the first primer coat and surface corrections, 320 after the second primer coat, 320 or 400 after the first topcoat, and 400 to 600 only before a third topcoat when needed. Every project includes a five-year written warranty.