Wide view of a white kitchen with a long island, white cabinet doors, and light plank flooring
White cabinets · refinished
Room reflections and a stainless pull on finished black island doors in Temecula
Black island · sprayed 2K

Sprayed 2K

Cabinet Refinishing Cost in Wildomar

A smooth sprayed finish. A kitchen you're proud to show off.

  • Yelp: 56 reviews, 4.8-star rating
  • Google: 10 reviews, 5.0-star rating
  • 5-Year Written Warranty

    The written 5-year warranty covers chipping, peeling or blistering caused by faulty preparation. The coating itself is covered by its manufacturer.

  • CSLB #1015608

See and feel finish samples in your own kitchen.

Standard single-color exterior cabinet refinishing commonly runs about $135–$185 per cabinet door and $95–$145 per drawer front before project-specific adjustments.

Temecula Valley · Cabinet cost guide

Budgeting for Wildomar cabinets

Southern California planning guidance — not a price list.

A home near The Farm and a Bundy Canyon property may have different layouts and coating histories. A useful budget begins with the actual pieces and finish condition.

Count the pieces. Define the work.

What the Wildomar planning ranges cover

Each rate is per one physical cabinet door or drawer front — not per cabinet box.

Cabinet refinishing planning ranges: doors and drawer fronts, grain filling, and painted interiors
OptionWhat it coversPlanning range
Cabinet doorFront and back painted; cabinet boxes, face frames, toe kicks, and side panels included$135–$185 per cabinet door
Drawer frontPainted; same inclusions as the door$95–$145 per drawer front
Grain filling (optional)Light for shallow grain or heavy for deep grain such as red oak; door fronts only, or fronts and backsadds $30–$85 per cabinet door; $10–$20 per drawer front
Painted interiors (optional)The inside of the cabinet boxes, cleaned and sprayed; an average, since it depends on how many boxes there are and their conditionadds $35–$60 per cabinet door; $25–$45 per drawer front

These planning ranges include the standard exterior work on your cabinets: door fronts and backs, drawer fronts, face frames, box exteriors, toe kicks, and side panels.

They also include removal and reinstall, preparation, 2K polyurethane, HEPA-vacuumed sanding, sealed negative-pressure containment, and the 5-year written warranty.

Tyler Fowler handles each project personally.

Oak grain remains visible unless you choose grain filling.

A fan draws air through a regular filter and vents outdoors to help control airborne dust, overspray, and fumes within the work area.

Tyler provides a fixed written quote after counting your doors and drawer fronts and looking over the cabinets in person.

For a full kitchen, the door and drawer-front count is the starting point.

Pricing guidance last verified October 24, 2026.

Wildomar cabinetry cannot be dated from one building boom

SCAG’s Wildomar housing profile records a substantial 1980s construction group as well as the larger 2000–2009 group. That mix matters when assessing a kitchen: a home may have original boxes, later replacement doors or a repaint that no longer matches the coating inside the cabinets.

At a property near The Farm, identify additions and remodeled cabinet sections before the count. A new drawer bank beside older doors is still part of the same room, but it may need different preparation. The development name cannot establish whether the faces are oak, maple, veneer or an earlier painted surface.

For a Bundy Canyon kitchen, list any pantry, island or separate built-in that should receive the new finish. The scope follows the requested cabinet surfaces, rather than assumptions about a ranch-style house or a newer tract layout. Count the fronts instead of applying one average kitchen allowance to the neighborhood.

The Farm and Bundy Canyon: practical details before the quote

Wildomar’s planning material identifies The Farm and the Bundy Canyon area as local reference points. Give the property address and the preferred approach when arranging a visit. A location near the corridor does not establish the lot’s wind exposure, cabinet material or repair requirements.

Explain the parking-to-kitchen route and any gate or carrying restrictions at the property. If detached storage or another room is part of the requested work, identify it separately. These details make the scope more complete without assuming that every Wildomar home has the same access or an automatic travel surcharge.

The inland climate brings dry summers and winter wetting, while conditions inside the kitchen depend on use and exposure. Show dust accumulation, greasy areas or damaged old coatings where they actually occur. A Bundy Canyon address is not proof that wind caused a finish problem or that all the doors need the same repair.

Use optional work to clarify the budget

Open-grain wood can be refinished with its texture visible or with separately chosen grain filling. Inspect the actual grain before deciding. An existing painted cabinet can instead raise questions about adhesion and earlier preparation, so those issues should not be priced as though they were simply a texture preference.

Box interiors deserve a separate look. If the factory finish is sound, retaining it may keep the project focused on the exterior color change. If an interior is damaged, greasy or peeling, show the affected boxes. The Wildomar written quote can then separate necessary preparation, optional interiors and the chosen exterior appearance.

Planning the visit from Anza

Wildomar is approximately 46 road miles from Anza in city-to-city routing. The west-corridor approach follows CA-371 and CA-79 toward Temecula, then I-15 toward Wildomar. A Bundy Canyon address needs a different last leg from a property west of the freeway; share that detail when setting up the visit.

Local context sources

Housing history and place names are context for an inspection; they do not establish the material in an individual kitchen.

Questions before the quote

Wildomar cabinet cost FAQ

Are Wildomar cabinets mostly from the same construction period?

No. SCAG’s profile includes substantial 1980s housing as well as a larger 2000s group, and later kitchen remodels can change the cabinet age again. Tyler inspects the current installation rather than assigning one preparation allowance to every Wildomar house.

What should a homeowner near The Farm prepare for a cabinet visit?

List the requested cabinets, point out added or remodeled sections and provide the property’s access information. The Farm helps locate the visit, but it does not establish the wood or coating. The count and condition review should follow the actual kitchen.

Does a Bundy Canyon address mean extra wind-damage preparation?

No. The corridor’s location is a reason to ask about exposure, not proof of cabinet damage. Show any observed contamination, worn finish or earlier repair during the visit. Additional preparation belongs in the quote when the surfaces need it, rather than being assumed from the address.

Can older Wildomar doors and a newer island be refinished together?

They can be included in the requested project, with the materials and earlier finishes identified separately. Show where the newer work begins. That helps the fixed quote account for different preparation needs instead of assuming that matching colors mean the underlying cabinetry is identical.

Should a Wildomar budget include every cabinet interior?

Only request the interiors that should change after checking their condition. Sound factory interiors may remain, while damaged or peeling boxes need a separate preparation discussion. At a property near The Farm or Bundy Canyon, identify those boxes individually so optional interior work stays distinct from the exterior color change.

Plan the Wildomar cabinet project

Get Your Free Estimate

Or call (951) 551-0583

Tyler or Melissa will reply to set up a visit. Tyler brings a sample to your home and gives a fixed written quote after looking over the cabinets in person.

The Finished Result

A smooth, sprayed 2K finish on a kitchen island, refinished in place.

Watch the reflection · 0:04
Black island door and drawer bank with brass knobs; the room reflects in the sprayed door
Black island · sprayed 2K

What goes into that finish

The work behind the finish.

The time is in the preparation, surface corrections, sanding and sprayed coating system. These are photos from Tyler’s process.

The Cabinet Refinishing Process

Four production phases, from door removal through the final walkthrough. Tyler Fowler handles each project personally.

  1. Kitchen openings, counters and floors masked before cabinet preparation

    Protect & clean

    Remove and label the doors. Mask the kitchen, degrease and prepare the surfaces.

    Cabinet box exteriors are sprayed in place, inside a sealed, negative-pressure work area that is set up in the kitchen before sanding begins and stays in place through spraying.

    A fan draws air through a regular filter and vents outdoors to help control airborne dust, overspray, and fumes within the work area.

    Protect and prepare

    The doors and drawer fronts are prepped at Tyler's shop. The cabinet boxes get the same prep in your kitchen, where you can see it done.

  2. Applying glazing putty to a primed cabinet door on a lit inspection table

    Prime & correct

    The longest step. Two primer coats. Between them, every surface is skim-coated with glazing putty, dents and seams are spot-puttied, and it is all sanded smooth. Every surface is checked under bright inspection lights before the topcoat. Optional grain filling.

  3. Sanding the glazing-putty skim on a cabinet door

    Sand smooth

    Sand the corrections, primer and between topcoats. Each coat needs drying time.

    Sanding is HEPA-vacuumed, and the cabinet exteriors are finished in 2K polyurethane.

  4. Tyler spraying 2K polyurethane on a prepared kitchen end panel

    Spray & reinstall

    Spray two to three 2K topcoats. Reinstall and align the doors once ready.

    Doors and drawer fronts are sprayed in the negative-pressure booth at the shop.

    Cabinet boxes are sprayed in place inside the sealed work area.

    Build the finish

    The topcoats go on the same way as the primer: doors in the shop's spray booth, boxes in your kitchen's sealed, negative-pressure work area. Each coat gets the required drying time before the next step.

    Back together

    Required drying time, reinstallation, alignment, and the final walkthrough.

2K polyurethane costs more than one-part cabinet paint. Your quote also covers the preparation, shop finishing and drying time shown here.

In your kitchenAbout a weekSealed only during the in-home week.
Doors & drawer fronts in the shopAbout a weekUse your kitchen without the doors.

Larger kitchens and grain filling take longer; your written quote gives the dates.

More process close-ups

See the full spray photo

See the full 14-step process

Finish proof

The finish, up close

White kitchen cabinets and a white island with silver appliances and a vase of branches
White kitchen · refinished

Cabinet refinishing in Wildomar

Keep your kitchen.
Change the finish.

Sound cabinets and a layout you like? Refinish the cabinets you already own in sprayed 2K polyurethane.

  • A sprayed cabinet finishTwo-component 2K polyurethane, with preparation and sanding between coats.
  • Tyler handles your projectFrom the in-home estimate through reinstall and the final walkthrough.
  • A written prep warrantyFive years for chipping, peeling or blistering caused by faulty preparation.
Tyler Fowler, owner of Parallel Painting
Owner-Operated

Meet Tyler

Tyler Fowler handles each project personally, from the estimate through the final walkthrough. Melissa handles scheduling and the phone; you can always ask for Tyler.

  • One jobat a time, Tyler on site
  • 5 yearswritten warranty on prep
  • Samplesin your own kitchen
  • 2016CSLB #1015608 since
Yelp: 56 reviews, 4.8-star rating · Google: 10 reviews, 5.0-star rating

Why Homeowners Choose Parallel Painting

Sprayed 2K polyurethane, a sealed negative-pressure work area, careful preparation and a written 5-year warranty.

  • 2K Polyurethane

    A factory-grade, two-component catalyzed polyurethane, sprayed with HVLP in two to three topcoats.

  • HEPA-Vacuumed Sanding

    Industrial HEPA vacuums hooked to sanders during prep.

  • Sealed Negative-Pressure Containment

    Before sanding starts, Tyler seals the work area and establishes negative pressure.

  • Owner-Operated

    Tyler Fowler handles each project personally, from the estimate through the final walkthrough.

The Coating System

Sprayed 2K Polyurethane, Built Over Real Prep

Every door and drawer front comes off, gets cleaned and sanded, and is sprayed in the negative-pressure booth at Tyler's shop. The cabinet boxes get the same 2K polyurethane right in your kitchen, sprayed inside a sealed, negative-pressure work area that Tyler sets up before sanding begins and keeps in place through spraying. Sanding is HEPA-vacuumed. Priming and surface correction is the longest step of the job. After the first primer coat, every door, drawer front and cabinet surface is skim-glazed with glazing putty, dents, gouges and open seams are spot-puttied, and everything is sanded back smooth. Doors and drawer fronts are checked on inspection tables under bright shop lights, and the cabinet boxes are checked in the kitchen with LED inspection light bars, so dents, sanding marks and uneven spots are found and fixed in primer, before the 2K topcoat goes on. The second primer coat goes on over that corrected surface, so the 2K topcoat lays down on a flat, uniform base. Open-grain oak can also be grain-filled for a glass-smooth door. 2K is a two-component catalyzed finish: it chemically cures into a hard, tough shell instead of just drying like paint.

  • Factory-grade two-component (2K) polyurethane, sprayed
  • Doors and drawer fronts sprayed in a negative-pressure booth at the shop
  • Cabinet boxes sprayed in place inside a sealed, negative-pressure work area
  • HEPA-vacuumed sanding, multiple finish coats on every kitchen. Prime & correct. The longest step. Two primer coats. Between them, every surface is skim-coated with glazing putty, dents and seams are spot-puttied, and it is all sanded smooth. Every surface is checked under bright inspection lights before the topcoat. Optional grain filling.
Wide view of a white kitchen with a long island, white cabinet doors, and light plank flooring

Reviews

Client Reviews

Read reviews on Google and Yelp

“Tyler's work was meticulous. The cabinets look new. The wear, tear, and damage is gone. I could never have done this quality of work myself.”

MichaelGoogle review

“Tyler’s workmanship is exceptional! He’s meticulous when it comes to his work. He refinished our kitchen cabinets and they look amazing! I highly recommend Parallel Painting!”

Carmen A.Google review

“He turned our beech colored wood shaker cabinets into white cabinets and painted our island blue for a nice pop of color. You can tell Tyler takes pride in his work and is very meticulous to every single detail.”

Jamie T.Yelp review

“He also painted my kitchen cabinets and my bedroom doors and trim as well as the front door. So basically everything in my tiny 600 ft condo. It came out gorgeous. He's on time and a meticulous worker.”

SusanGoogle review

Next step

Ready for a Factory-Grade Finish on Your Cabinets?

Tyler takes one job at a time, and Melissa handles his schedule and the phone. Call or text for an in-home estimate.

Call or text Tyler: (951) 551-0583

Call (951) 551-0583Get Your Free Estimate