White kitchen cabinets refinished by Parallel Painting
White cabinets · refinished
Room reflections and a stainless pull on finished black island doors in Temecula
Black island · sprayed 2K

Sprayed 2K

2K Polyurethane Cabinet Refinishing — A Factory-Finished Look

A smooth sprayed finish. A kitchen you're proud to show off.

  • Yelp: 56 reviews, 4.8-star rating
  • Google: 10 reviews, 5.0-star rating
  • 5-Year Written Warranty

    The written 5-year warranty covers chipping, peeling or blistering caused by faulty preparation. The coating itself is covered by its manufacturer.

  • CSLB #1015608

See and feel finish samples in your own kitchen.

Planning range: $135–$185 per door, $95–$145 per drawer front.

The Finished Result

A smooth, sprayed 2K finish on a kitchen island, refinished in place.

Watch the reflection · 0:04
Black island door and drawer bank with brass knobs; the room reflects in the sprayed door
Black island · sprayed 2K

What goes into that finish

The work behind the finish.

The time is in the preparation, surface corrections, sanding and sprayed coating system. These are photos from Tyler’s process.

The Cabinet Refinishing Process

Four production phases, from door removal through the final walkthrough. Tyler Fowler handles each project personally.

  1. Kitchen openings, counters and floors masked before cabinet preparation

    Protect & clean

    Remove and label the doors. Mask the kitchen, degrease and prepare the surfaces.

    Cabinet box exteriors are sprayed in place, inside a sealed, negative-pressure work area that is set up in the kitchen before sanding begins and stays in place through spraying.

    A fan draws air through a regular filter and vents outdoors to help control airborne dust, overspray, and fumes within the work area.

    Protect and prepare

    The doors and drawer fronts are prepped at Tyler's shop. The cabinet boxes get the same prep in your kitchen, where you can see it done.

  2. Applying glazing putty to a primed cabinet door on a lit inspection table

    Prime & correct

    The longest step. Two primer coats. Between them, every surface is skim-coated with glazing putty, dents and seams are spot-puttied, and it is all sanded smooth. Every surface is checked under bright inspection lights before the topcoat. Optional grain filling.

  3. Sanding the glazing-putty skim on a cabinet door

    Sand smooth

    Sand the corrections, primer and between topcoats. Each coat needs drying time.

    Sanding is HEPA-vacuumed, and the cabinet exteriors are finished in 2K polyurethane.

  4. Tyler spraying 2K polyurethane on a prepared kitchen end panel

    Spray & reinstall

    Spray two to three 2K topcoats. Reinstall and align the doors once ready.

    Doors and drawer fronts are sprayed in the negative-pressure booth at the shop.

    Cabinet boxes are sprayed in place inside the sealed work area.

    Build the finish

    The topcoats go on the same way as the primer: doors in the shop's spray booth, boxes in your kitchen's sealed, negative-pressure work area. Each coat gets the required drying time before the next step.

    Back together

    Required drying time, reinstallation, alignment, and the final walkthrough.

2K polyurethane costs more than one-part cabinet paint. Your quote also covers the preparation, shop finishing and drying time shown here.

In your kitchenAbout a weekSealed only during the in-home week.
Doors & drawer fronts in the shopAbout a weekUse your kitchen without the doors.

Larger kitchens and grain filling take longer; your written quote gives the dates.

More process close-ups

See the full spray photo

See the full 14-step process

Finish proof

The finish, up close

Refinish the cabinets you already own with a smooth, sprayed finish in 2K polyurethane. Tyler Fowler handles each project personally. The process includes HEPA-vacuumed sanding and a written 5-year warranty on the prep. Serving Temecula Valley and the Coachella Valley.

Tyler brings a sample to your home and gives a fixed written quote after looking over the cabinets in person.

Finished island · Temecula · sprayed 2K

What does Parallel Painting include in cabinet refinishing?

Cabinet refinishing at Parallel Painting means your existing cabinets are cleaned, deglossed, sanded, sprayed with 2K polyurethane, reinstalled, and backed by a 5-year written warranty. Priming and surface correction is the longest step of the job. After the first primer coat, every door, drawer front and cabinet surface is skim-glazed with glazing putty, dents, gouges and open seams are spot-puttied, and everything is sanded back smooth. Doors and drawer fronts are checked on inspection tables under bright shop lights, and the cabinet boxes are checked in the kitchen with LED inspection light bars, so dents, sanding marks and uneven spots are found and fixed in primer, before the 2K topcoat goes on. The second primer coat goes on over that corrected surface, so the 2K topcoat lays down on a flat, uniform base. Open-grain oak can also be grain-filled for a glass-smooth door.

Cabinet refinishing addresses heat, steam, grease, fingerprints, and constant edge contact through a two-component catalyzed polyurethane system, sprayed with HVLP over carefully prepared surfaces. The work happens inside a sealed, negative-pressure work area vented outside, with HEPA-vacuumed sanding and detailed cleanup.

Plan on about a week of work in your kitchen and about a week for the doors and drawer fronts in the shop. Larger kitchens and grain filling take longer; your written quote gives the dates. Doors and drawer fronts are removed, labeled, and finished separately; frames are finished on site under containment. Once the finish is ready to handle, Tyler reinstalls and aligns the hardware so the kitchen looks complete again.

Cabinet refinishing near Temecula, Murrieta, and the Temecula Valley

Parallel Painting is an owner-operated cabinet refinishing contractor based in Anza, serving Temecula, Murrieta, Menifee, Wildomar and Lake Elsinore in Southwest Riverside County, nearby Fallbrook, and the Coachella Valley. Tyler Fowler, CSLB #1015608 since 2016, handles each project personally from estimate through final walkthrough.

Call or text (951) 551-0583 for the next open start date. Doors and drawer fronts are sprayed in the negative-pressure booth at Tyler's shop; cabinet frames are sprayed in place inside a sealed, negative-pressure work area. Every job is backed by a 5-year written warranty.

If you're comparing cabinet refinishing contractors in the Temecula Valley, see the Temecula cabinet refinishing page or read the guide to choosing a cabinet refinishing contractor before signing.

Before & After — The Same Kitchen

Real job photos. Cabinets refinished in sprayed 2K polyurethane; walls repainted.

Before: Same window wall: cream cabinets and a dated backsplash, refinished in sprayed white with a full repaint.Before
After: Same window wall: cream cabinets and a dated backsplash, refinished in sprayed white with a full repaint.After

Same window wall: cream cabinets and a dated backsplash, refinished in sprayed white with a full repaint.

Before: Same range and fridge wall: brighter cabinets, cleaner lines, one kitchen transformed.Before
After: Same range and fridge wall: brighter cabinets, cleaner lines, one kitchen transformed.After

Same range and fridge wall: brighter cabinets, cleaner lines, one kitchen transformed.

What Cabinet Clients Say

Yelp: 56 reviews, 4.8-star rating · Google: 10 reviews, 5.0-star rating

“Tyler's work was meticulous. The cabinets look new. The wear, tear, and damage is gone. I could never have done this quality of work myself.”

Michael
Google review

“Tyler’s workmanship is exceptional! He’s meticulous when it comes to his work. He refinished our kitchen cabinets and they look amazing! I highly recommend Parallel Painting!”

Carmen A.
Google review

Two-Component (2K) Polyurethane Cabinet Finishes

Two-tone kitchen — sprayed island finish
Two-tone kitchen — sprayed island finish
White shaker kitchen and island — refinished, reinstalled, and aligned
White shaker kitchen and island — refinished, reinstalled, and aligned
Bright white sprayed finish — smooth doors, clean lines
Bright white sprayed finish — smooth doors, clean lines
Blue island with white perimeter cabinets — sprayed finish
Blue island with white perimeter cabinets — sprayed finish
Modern condo kitchen — smooth white sprayed finish
Modern condo kitchen — smooth white sprayed finish

Why Homeowners Choose Parallel Painting

2K Polyurethane

Cabinet refinishing uses a factory-grade, two-component catalyzed urethane — the coating chemistry used on European cabinetry. It is a water-based system with lower solvent odor than many traditional solvent-borne coatings, and the hardener creates a chemically cross-linked finish. Parallel Painting applies it by HVLP spray for a smooth surface without brush or roller texture.

Dust-Controlled Containment

Not a piece of sandpaper is lifted until the kitchen is protected, sealed, and under negative pressure. A fan draws air through a regular filter and vents outdoors to help control airborne dust, overspray, and fumes within the work area. Every sander runs on a HEPA vacuum, and a detailed cleanup follows. Tyler explains each control before you sign anything.

HVLP Spray Finish

Doors and drawer fronts are sprayed in the negative-pressure booth at Tyler's shop; the frames are sprayed in place inside a sealed, negative-pressure work area for a smooth, even coat with no brush marks.

Owner-Operated

Owner-operated; Tyler Fowler handles each project personally, from the estimate through the final walkthrough.

How to Get a Quote

  1. Text photos of your kitchen to (951) 551-0583.
  2. Tyler or Melissa reply to set up a visit. Tyler brings a sample to your home, counts every door and drawer front, and gives a fixed written quote after looking over the cabinets in person.
  3. Review the scope and the written 5-year warranty.
  4. Call or text (951) 551-0583 for the next open start date.

See the quote and warranty review →

Refinishing vs Repaint vs Replacement

A quick repaint

Brushed or rolled single-component paint may show brush or roller texture. Coating selection and preparation should match the substrate, condition, and intended use.

Professional refinishing with 2K

Sprayed factory-grade finish over full prep, grain fill optional on oak, 5-year written warranty. Keep the boxes and layout you have.

When refinishing may not fit

Damaged boxes, a layout that no longer works, or structurally failing doors may limit refinishing. Tyler assesses those conditions during the estimate.

Tyler assesses whether refinishing suits your kitchen during the in-home estimate, based on cabinet condition and layout.

Why a refinish costs what it does

Here is the work a full refinish includes:

  1. Protect and prepare — The doors and drawer fronts are prepped at Tyler's shop. The cabinet boxes get the same prep in your kitchen, where you can see it done.
  2. Prime and smooth — Priming and surface correction is the longest step of the job. After the first primer coat, every door, drawer front and cabinet surface is skim-glazed with glazing putty, dents, gouges and open seams are spot-puttied, and everything is sanded back smooth. Doors and drawer fronts are checked on inspection tables under bright shop lights, and the cabinet boxes are checked in the kitchen with LED inspection light bars, so dents, sanding marks and uneven spots are found and fixed in primer, before the 2K topcoat goes on. The second primer coat goes on over that corrected surface, so the 2K topcoat lays down on a flat, uniform base. Open-grain oak can also be grain-filled for a glass-smooth door.
  3. Build the finish — The topcoats go on the same way as the primer: doors in the shop's spray booth, boxes in your kitchen's sealed, negative-pressure work area. Each coat gets the required drying time before the next step.
  4. Back together — Required drying time before handling and reinstallation, followed by alignment and the final walkthrough.

A fan draws air through a regular filter and vents outdoors to help control airborne dust, overspray, and fumes within the work area.

The quote and the written warranty are reviewed separately.

Add it up: a full kitchen is 60 to 100-plus hours of hands-on work.

Compare the preparation, coating system and finishing steps included in each written quote.

See the process step by step, with video from a real job

In writing. Signed. Five years.

5-Year Written Warranty

Cabinet and painting work is backed by a written 5-year warranty covering chipping, peeling or blistering caused by faulty preparation. Review the coverage, exclusions, duration and responsibility for repair materials before work begins.

Get Your Free Estimate

Cabinet refinishing planning pricing

Southern California planning guidance — not a price list.

Standard single-color exterior cabinet refinishing commonly runs about $135–$185 per cabinet door and $95–$145 per drawer front before project-specific adjustments.

Each rate is per one physical cabinet door or drawer front — not per cabinet box.

These planning ranges include the standard exterior work on your cabinets: door fronts and backs, drawer fronts, face frames, box exteriors, toe kicks, and side panels. They also include removal and reinstall, preparation, 2K polyurethane, HEPA-vacuumed sanding, sealed negative-pressure containment, and the 5-year written warranty. Tyler Fowler handles each project personally. Oak grain remains visible unless you choose grain filling.

What moves the price

Three things set the price:

Cabinet refinishing planning ranges: doors and drawer fronts, grain filling, and painted interiors
OptionWhat it coversPlanning range
Cabinet doorFront and back painted; cabinet boxes, face frames, toe kicks, and side panels included$135–$185 per cabinet door
Drawer frontPainted; same inclusions as the door$95–$145 per drawer front
Grain filling (optional)Light for shallow grain or heavy for deep grain such as red oak; door fronts only, or fronts and backsadds $30–$85 per cabinet door; $10–$20 per drawer front
Painted interiors (optional)The inside of the cabinet boxes, cleaned and sprayed; an average, since it depends on how many boxes there are and their conditionadds $35–$60 per cabinet door; $25–$45 per drawer front

Small kitchens cost more per door, because the same sealed, negative-pressure work area still has to be built around them; failing old finishes, heavy damage, extra colors, repairs and specialty finishes also add to the price. A fan draws air through a regular filter and vents outdoors to help control airborne dust, overspray, and fumes within the work area.

Grain filling on frames and panels is quoted separately. Filling follows an approved cured sample. Heavy oak comes out smooth to the touch with the pores filled, but it is still real wood: under bright side light you will see gentle waves from the grain, not the dead-flat look of MDF.

Painted interiors are counted per cabinet box; corner, lazy-susan, sink, and extra-wide boxes take more.

A sound factory interior can be cleaned and sprayed. Damaged, peeling, or heavily greasy interiors need extra preparation and bonding primer.

Interiors are not grain-filled unless you request that separate work and approve a cured sample.

If you want a completely flat, MDF-style door on heavy oak, new doors are supplied and installed by a licensed cabinet partner. Parallel Painting finishes the new doors in the same 2K and refinishes the existing boxes to match; its painting license does not cover supplying or installing doors.

Tyler provides a fixed written quote after counting your doors and drawer fronts and looking over the cabinets in person.

For a full kitchen, the door and drawer-front count is the starting point.

See the complete cabinet-refinishing pricing guide · Read cabinet pricing and grain-fill FAQs

Pricing guidance last verified October 24, 2026.

Get Your Free Estimate

Or call (951) 551-0583

Tyler or Melissa will reply to set up a visit. Tyler brings a sample to your home and gives a fixed written quote after looking over the cabinets in person.

Cabinet Refinishing FAQ

How much does cabinet refinishing cost?

Standard single-color exterior cabinet refinishing commonly runs about $135–$185 per cabinet door and $95–$145 per drawer front before project-specific adjustments. This is Southern California planning guidance — not a price list. Each rate is per one physical cabinet door or drawer front — not per cabinet box. These planning ranges include the standard exterior work on your cabinets: door fronts and backs, drawer fronts, face frames, box exteriors, toe kicks, and side panels. They also include removal and reinstall, preparation, 2K polyurethane, HEPA-vacuumed sanding, sealed negative-pressure containment, and the 5-year written warranty. Tyler Fowler handles each project personally. Oak grain remains visible unless you choose grain filling. Three things set the price: Doors and drawer fronts: the per-piece range above, with the cabinet boxes, face frames, toe kicks, and side panels included. Grain filling: adds about $30–$85 per cabinet door and $10–$20 per drawer front, depending on how deep the grain is and whether the backs of the doors are filled too. Painted interiors: add about $35–$60 per cabinet door and $25–$45 per drawer front on average, depending on how many cabinets there are and the condition of the insides. Some interiors are prefinished and fine as they are. Small kitchens cost more per door, because the same sealed, negative-pressure work area still has to be built around them; failing old finishes, heavy damage, extra colors, repairs and specialty finishes also add to the price. A fan draws air through a regular filter and vents outdoors to help control airborne dust, overspray, and fumes within the work area. Tyler provides a fixed written quote after counting your doors and drawer fronts and looking over the cabinets in person. For a full kitchen, the door and drawer-front count is the starting point.

What is cabinet refinishing?

Cabinet refinishing keeps your existing cabinet boxes, doors, and drawer fronts and gives them a new professional finish. Parallel Painting cleans, deglosses, sands, primes, fills the grain if you choose it, sprays 2K polyurethane, reinstalls the doors and drawers, and backs the work with a 5-year written warranty.

Is cabinet refinishing worth it?

Usually, yes, if your cabinet boxes are solid and you like your layout. Refinishing keeps the cabinets you already own and gives them a sprayed 2K polyurethane finish for a fraction of what new cabinets cost, with no demolition and no new countertops. It isn't worth it when the boxes are water-damaged, the doors are falling apart, or you want a different layout. Tyler Fowler assesses whether refinishing suits your kitchen at the free in-home estimate, and the prep carries a written 5-year warranty.

How long does cabinet refinishing take?

Plan on about a week of work in your kitchen and about a week for the doors and drawer fronts in the shop. Larger kitchens and grain filling take longer; your written quote gives the dates. The timeline depends on kitchen size, existing finish condition, wood grain, color change, repairs, and drying and recoat requirements for the coating system.

Is refinishing better than replacing cabinets?

Refinishing is usually the better choice when the cabinet boxes and doors are solid and the layout works. Damaged boxes, a layout that no longer works, or structurally failing doors may limit refinishing. Tyler assesses those conditions during the estimate.

Why 2K polyurethane instead of standard cabinet paint?

Kitchen cabinets take heat, steam, grease, fingerprints, and constant edge contact in a way walls do not. 2K polyurethane is a factory-grade, two-component catalyzed coating — the chemistry used on European cabinetry. The hardener is what makes it cure into a hard, tough shell. It cures by chemical cross-linking rather than simply drying. The 2K topcoats are applied by HVLP spray only, never brushed or rolled, so the finish lays down smooth to the touch, with no brush or roller marks.

Do you paint just the doors, or the whole kitchen?

Both. Doors and drawer fronts are removed, labeled, and sprayed separately in the negative-pressure booth at Tyler's shop. Cabinet frames are sprayed in place inside a sealed, negative-pressure work area. Everything is reinstalled and aligned by Tyler at the end so the kitchen looks complete. A fan draws air through a regular filter and vents outdoors to help control airborne dust, overspray, and fumes within the work area.

What does the 5-year written warranty cover?

For five years from completion, the written warranty covers chipping, peeling, or blistering caused by faulty prep. It's a signed document you keep — the warranty itself spells out the full terms and standard exclusions.

Who does cabinet refinishing near me in Temecula?

Parallel Painting is owner-operated out of Anza and serves cabinet refinishing customers across Temecula, Murrieta, Menifee, Wildomar, Lake Elsinore, and Fallbrook, as well as the Coachella Valley. Tyler Fowler, CSLB #1015608, licensed since 2016, handles each project personally from the estimate through the final walkthrough. Call or text (951) 551-0583 for the next open start date. Doors and drawer fronts are sprayed in the negative-pressure booth at Tyler's shop; cabinet frames are sprayed in place inside a sealed, negative-pressure work area, backed by a 5-year written warranty.

How do I find a reliable cabinet refinishing contractor near me?

Check for a real license number (Tyler's is CSLB #1015608, in business since 2016), ask who will handle the project, ask what coating system is used and whether it is catalyzed, and get the warranty in writing before signing. See the full guide on how to choose a cabinet refinishing contractor for the complete checklist.

Cabinet Refinishing Service Areas

Serving Temecula Valley, Southwest Riverside County, and the Coachella Valley.

Related Cabinet Resources

Ready to Refinish Your Cabinets?

Call or text Tyler for a cabinet refinishing estimate.

Get Your Free Estimate

Or call (951) 551-0583

Call or text Tyler: (951) 551-0583

Call (951) 551-0583Get Your Free Estimate