Wide view of a white kitchen with a long island, white cabinet doors, and light plank flooring
White cabinets · refinished
Room reflections and a stainless pull on finished black island doors in Temecula
Black island · sprayed 2K

Sprayed 2K

Cabinet Refinishing Cost in Indian Wells

A smooth sprayed finish. A kitchen you're proud to show off.

  • Yelp: 56 reviews, 4.8-star rating
  • Google: 10 reviews, 5.0-star rating
  • 5-Year Written Warranty

    The written 5-year warranty covers chipping, peeling or blistering caused by faulty preparation. The coating itself is covered by its manufacturer.

  • CSLB #1015608

See and feel finish samples in your own kitchen.

Standard single-color exterior cabinet refinishing commonly runs about $135–$185 per cabinet door and $95–$145 per drawer front before project-specific adjustments.

Coachella Valley · Cabinet cost guide

Budgeting for Indian Wells cabinets

Southern California planning guidance — not a price list.

An Eldorado or Indian Wells Country Club kitchen deserves a piece-by-piece scope. The address alone does not establish rare wood, cabinet size or a price premium.

Count the pieces. Define the work.

What the Indian Wells planning ranges cover

Each rate is per one physical cabinet door or drawer front — not per cabinet box.

Cabinet refinishing planning ranges: doors and drawer fronts, grain filling, and painted interiors
OptionWhat it coversPlanning range
Cabinet doorFront and back painted; cabinet boxes, face frames, toe kicks, and side panels included$135–$185 per cabinet door
Drawer frontPainted; same inclusions as the door$95–$145 per drawer front
Grain filling (optional)Light for shallow grain or heavy for deep grain such as red oak; door fronts only, or fronts and backsadds $30–$85 per cabinet door; $10–$20 per drawer front
Painted interiors (optional)The inside of the cabinet boxes, cleaned and sprayed; an average, since it depends on how many boxes there are and their conditionadds $35–$60 per cabinet door; $25–$45 per drawer front

These planning ranges include the standard exterior work on your cabinets: door fronts and backs, drawer fronts, face frames, box exteriors, toe kicks, and side panels.

They also include removal and reinstall, preparation, 2K polyurethane, HEPA-vacuumed sanding, sealed negative-pressure containment, and the 5-year written warranty.

Tyler Fowler handles each project personally.

Oak grain remains visible unless you choose grain filling.

A fan draws air through a regular filter and vents outdoors to help control airborne dust, overspray, and fumes within the work area.

Tyler provides a fixed written quote after counting your doors and drawer fronts and looking over the cabinets in person.

For a full kitchen, the door and drawer-front count is the starting point.

Pricing guidance last verified October 24, 2026.

Country-club history is context, not a cabinet specification

Indian Wells’ city history places Indian Wells Country Club and Eldorado Country Club in the resort-development period of the 1950s. Residential building continued afterward. That history explains why an estimate should allow for original construction, additions and later remodeling, rather than assuming every country-club kitchen is the same age.

Before an opaque finish is chosen, identify the material to be covered and any surfaces that should remain wood. If a veneer is present, examine its edges and repaired areas. If doors have detailed profiles, show those too. A prestigious address does not verify a rare species or a particular door construction.

Separate the main kitchen from a pantry, serving area or other built-in requested in the project. The count should include the physical fronts and exposed surfaces actually being refinished. Avoid using a home’s square footage or a presumed luxury-kitchen size as a replacement for that inventory.

Custom detail and access should be described explicitly

At Eldorado Country Club or Indian Wells Country Club, provide the entry information and any contractor instructions that apply to the property. Clarify where pieces can be carried out and returned. Association requirements are address-specific; the guide does not claim one set of work rules for every Indian Wells community.

A decorative hood surround, glazed door or detailed end panel may need a finish decision beyond a simple color name. List what should match and what should stay as it is. Additional colors or specialty finishes belong in the written scope, rather than being treated as automatically included in standard single-color work.

Indian Wells shares the Coachella Valley’s hot, dry desert setting. Strong light near windows can make texture and earlier repairs easier to see. Use those viewing conditions during the estimate to discuss the expected appearance, without promising that an opaque coating eliminates every natural movement or grain feature.

Keep grain, interiors and repair choices separate

If the inspection finds open-grain wood, decide whether that texture should remain. Grain filling is an option, while a sound smooth-faced door raises different preparation questions. The material and desired appearance determine the conversation; a country-club location does not make grain filling mandatory.

Check the box interiors before requesting an all-over color change. Retaining suitable factory interiors can keep the scope focused on visible exterior surfaces. If interiors are damaged or peeling, the quote should describe the extra preparation and painting. The options table keeps those decisions separate from the base exterior work.

Planning the visit from Anza

Indian Wells is roughly 33–36 road miles from Anza in published city-to-city routing. The eastward approach uses CA-371 and CA-74 into Palm Desert, then continues toward Indian Wells. The destination within the city and the route chosen account for some variation; gate access adds another local step.

Local context sources

Housing history and place names are context for an inspection; they do not establish the material in an individual kitchen.

Questions before the quote

Indian Wells cabinet cost FAQ

Are Eldorado kitchens automatically priced as custom luxury work?

No. Eldorado’s history and setting do not establish the cabinets’ material, size or condition. The published planning ranges remain the same. Custom profiles, repairs or specialty finishes affect a quote when they are present and requested, rather than being assumed from the address.

What helps with an Indian Wells Country Club cabinet estimate?

Provide the entry instructions and identify the rooms and built-ins to be included. Show Tyler any additions or prior remodels as well. The city’s country-club history spans more than one building period, so the inspection should follow the actual kitchen rather than an assumed original installation.

Does a wood veneer in an Indian Wells kitchen need special attention?

If veneer is present, its edges, corners and earlier patches should be inspected before refinishing. The guide does not assume that all Indian Wells cabinetry is veneered. Identifying the material at the visit helps separate ordinary preparation from repair that needs its own written scope.

Can glazing and decorative panels be included in the Indian Wells base range?

Standard pricing is for single-color exterior refinishing. Show any glaze, decorative profile or panel that should be retained or changed, and discuss the desired result. Specialty work and additional colors need to be described in the fixed quote instead of being assumed from a broad kitchen total.

How should a bright Indian Wells kitchen be used to judge finish expectations?

Point out surfaces viewed in strong window light and show any visible grain or old repairs. Those conditions help discuss the appearance being requested. Desert light does not establish a separate price or justify a promise that natural wood will look perfectly flat under every viewing angle.

Plan the Indian Wells cabinet project

Get Your Free Estimate

Or call (951) 551-0583

Tyler or Melissa will reply to set up a visit. Tyler brings a sample to your home and gives a fixed written quote after looking over the cabinets in person.

The Finished Result

A smooth, sprayed 2K finish on a kitchen island, refinished in place.

Watch the reflection · 0:04
Black island door and drawer bank with brass knobs; the room reflects in the sprayed door
Black island · sprayed 2K

What goes into that finish

The work behind the finish.

The time is in the preparation, surface corrections, sanding and sprayed coating system. These are photos from Tyler’s process.

The Cabinet Refinishing Process

Four production phases, from door removal through the final walkthrough. Tyler Fowler handles each project personally.

  1. Kitchen openings, counters and floors masked before cabinet preparation

    Protect & clean

    Remove and label the doors. Mask the kitchen, degrease and prepare the surfaces.

    Cabinet box exteriors are sprayed in place, inside a sealed, negative-pressure work area that is set up in the kitchen before sanding begins and stays in place through spraying.

    A fan draws air through a regular filter and vents outdoors to help control airborne dust, overspray, and fumes within the work area.

    Protect and prepare

    The doors and drawer fronts are prepped at Tyler's shop. The cabinet boxes get the same prep in your kitchen, where you can see it done.

  2. Applying glazing putty to a primed cabinet door on a lit inspection table

    Prime & correct

    The longest step. Two primer coats. Between them, every surface is skim-coated with glazing putty, dents and seams are spot-puttied, and it is all sanded smooth. Every surface is checked under bright inspection lights before the topcoat. Optional grain filling.

  3. Sanding the glazing-putty skim on a cabinet door

    Sand smooth

    Sand the corrections, primer and between topcoats. Each coat needs drying time.

    Sanding is HEPA-vacuumed, and the cabinet exteriors are finished in 2K polyurethane.

  4. Tyler spraying 2K polyurethane on a prepared kitchen end panel

    Spray & reinstall

    Spray two to three 2K topcoats. Reinstall and align the doors once ready.

    Doors and drawer fronts are sprayed in the negative-pressure booth at the shop.

    Cabinet boxes are sprayed in place inside the sealed work area.

    Build the finish

    The topcoats go on the same way as the primer: doors in the shop's spray booth, boxes in your kitchen's sealed, negative-pressure work area. Each coat gets the required drying time before the next step.

    Back together

    Required drying time, reinstallation, alignment, and the final walkthrough.

2K polyurethane costs more than one-part cabinet paint. Your quote also covers the preparation, shop finishing and drying time shown here.

In your kitchenAbout a weekSealed only during the in-home week.
Doors & drawer fronts in the shopAbout a weekUse your kitchen without the doors.

Larger kitchens and grain filling take longer; your written quote gives the dates.

More process close-ups

See the full spray photo

See the full 14-step process

Finish proof

The finish, up close

White kitchen cabinets and a white island with silver appliances and a vase of branches
White kitchen · refinished

Cabinet refinishing in Indian Wells

Keep your kitchen.
Change the finish.

Sound cabinets and a layout you like? Refinish the cabinets you already own in sprayed 2K polyurethane.

  • A sprayed cabinet finishTwo-component 2K polyurethane, with preparation and sanding between coats.
  • Tyler handles your projectFrom the in-home estimate through reinstall and the final walkthrough.
  • A written prep warrantyFive years for chipping, peeling or blistering caused by faulty preparation.
Tyler Fowler, owner of Parallel Painting
Owner-Operated

Meet Tyler

Tyler Fowler handles each project personally, from the estimate through the final walkthrough. Melissa handles scheduling and the phone; you can always ask for Tyler.

  • One jobat a time, Tyler on site
  • 5 yearswritten warranty on prep
  • Samplesin your own kitchen
  • 2016CSLB #1015608 since
Yelp: 56 reviews, 4.8-star rating · Google: 10 reviews, 5.0-star rating

Why Homeowners Choose Parallel Painting

Sprayed 2K polyurethane, a sealed negative-pressure work area, careful preparation and a written 5-year warranty.

  • 2K Polyurethane

    A factory-grade, two-component catalyzed polyurethane, sprayed with HVLP in two to three topcoats.

  • HEPA-Vacuumed Sanding

    Industrial HEPA vacuums hooked to sanders during prep.

  • Sealed Negative-Pressure Containment

    Before sanding starts, Tyler seals the work area and establishes negative pressure.

  • Owner-Operated

    Tyler Fowler handles each project personally, from the estimate through the final walkthrough.

The Coating System

Sprayed 2K Polyurethane, Built Over Real Prep

Every door and drawer front comes off, gets cleaned and sanded, and is sprayed in the negative-pressure booth at Tyler's shop. The cabinet boxes get the same 2K polyurethane right in your kitchen, sprayed inside a sealed, negative-pressure work area that Tyler sets up before sanding begins and keeps in place through spraying. Sanding is HEPA-vacuumed. Priming and surface correction is the longest step of the job. After the first primer coat, every door, drawer front and cabinet surface is skim-glazed with glazing putty, dents, gouges and open seams are spot-puttied, and everything is sanded back smooth. Doors and drawer fronts are checked on inspection tables under bright shop lights, and the cabinet boxes are checked in the kitchen with LED inspection light bars, so dents, sanding marks and uneven spots are found and fixed in primer, before the 2K topcoat goes on. The second primer coat goes on over that corrected surface, so the 2K topcoat lays down on a flat, uniform base. Open-grain oak can also be grain-filled for a glass-smooth door. 2K is a two-component catalyzed finish: it chemically cures into a hard, tough shell instead of just drying like paint.

  • Factory-grade two-component (2K) polyurethane, sprayed
  • Doors and drawer fronts sprayed in a negative-pressure booth at the shop
  • Cabinet boxes sprayed in place inside a sealed, negative-pressure work area
  • HEPA-vacuumed sanding, multiple finish coats on every kitchen. Prime & correct. The longest step. Two primer coats. Between them, every surface is skim-coated with glazing putty, dents and seams are spot-puttied, and it is all sanded smooth. Every surface is checked under bright inspection lights before the topcoat. Optional grain filling.
Wide view of a white kitchen with a long island, white cabinet doors, and light plank flooring

Reviews

Client Reviews

Read reviews on Google and Yelp

“Tyler's work was meticulous. The cabinets look new. The wear, tear, and damage is gone. I could never have done this quality of work myself.”

MichaelGoogle review

“Tyler’s workmanship is exceptional! He’s meticulous when it comes to his work. He refinished our kitchen cabinets and they look amazing! I highly recommend Parallel Painting!”

Carmen A.Google review

“He turned our beech colored wood shaker cabinets into white cabinets and painted our island blue for a nice pop of color. You can tell Tyler takes pride in his work and is very meticulous to every single detail.”

Jamie T.Yelp review

“He also painted my kitchen cabinets and my bedroom doors and trim as well as the front door. So basically everything in my tiny 600 ft condo. It came out gorgeous. He's on time and a meticulous worker.”

SusanGoogle review

Next step

Ready for a Factory-Grade Finish on Your Cabinets?

Tyler takes one job at a time, and Melissa handles his schedule and the phone. Call or text for an in-home estimate.

Call or text Tyler: (951) 551-0583

Call (951) 551-0583Get Your Free Estimate